Formula: SEdit

Description: Sulfur has always been used extensively in pyrotechnics. It serves as a fuel, and reduces the ignition temperature of mixtures. It also tends to increase the burning rate and friction or shock sensitivity of most mixtures.

Hazards: Sulfur can increase the sensitivity of some mixtures, especially those based on chlorate or perchlorate oxidizers. Mixtures of chlorates and sulfur are also known to ignite spontaneously and should therefore be avoided at all times (also read the safety section). Mixtures of perchlorates and sulfur are less likely to ignite spontaneously but are still very sensitive and need to be treated with extreme caution. Burning sulfur produces sulfur dioxide  gas, inhalation of which should be avoided because it is extremely poisonous. Because sulfur is a very important chemical it is listed in the Beginners pages .

Sources: Sulfur is available from agricultural supply stores where it is sold as a fungicide under the name 'dusting sulfur'. It is a fine powder mixed with a few percent of calcium carbonate. The calcium carbonate may disturb delicate color compositions, but for most purposes dusting sulfur works well. If a purer form of sulfur is required, sulfur may also be obtained from drug stores sometimes. However, these often sell 'flowers of sulfur', which has been purified by sublimation and which contains some acid. This needs to be neutralized before use as it could cause spontaneous ignition. To do this, allow 100g of this sulfur to soak in a liter of water/household ammonia (1:5). Stir well occasionally and measure the pH. It should still be alkaline after two days, after which time the sulfur may be filtered and washed with hot water to remove the ammonia. Check the pH of the washing water while filtering. After it has become neutral, flush the water away with ethanol  and allow the sulfur to dry. Mix the dry powder with 2% magnesium carbonate to neutralize any acid that may be formed in reactions with the atmosphere.

Sulfur name and characteristics
Amorphous Sulfur Rapidly cooled sulfur not soluble in CS2
Bright Sulfur Crude sulfur without discoloring impurities
Brimstone Crude sulfur
Broken Rock Sulfur Refined sulfur mixture of lumps and dust
Colloidal Sulfur Sulfur that has been chemically precipitated in water
Crude Sulfur Bright or dark sulfur, free of Se, Te and As
Dark Sulfur Crude sulfur with hydrocarbon contamination
Dusting Sulfur Crude or refined powdered sulfur
Elemental Sulfur Native sulfur at least 99.5% pure
Flour Sulfur Crude sulfur 200 – 300 mesh
Flowable Sulfur Colloidal or agricultural sulfur
Flowers of Sulfur Sulfur purified by distillation (actually sublimation)
Frasch Sulfur Native sulfur from superheated water injection
Insoluble Sulfur Flowers of sulfur treated with carbon disulfide
Lac Sulfur Precipitated from polysulfide solutions, up to 45% CaSO4
Native Sulfur Naturally occurring elemental form – often large crystals
Precipitated Sulfur Precipitated from polysulfide, washed with HCl
Prilled Sulfur Crude sulfur in small round pellets
Recovered Sulfur Elemental sulfur from any combined sources
Refined Sulfur Distilled sulfur more than 99.8% pure
Rubber maker’s Sulfur Ground sulfur with low acid, ash and moisture content
Run-of-Mine Sulfur Frasch sulfur with lumps and fines
Slated Sulfur Crude sulfur that solidified on a moving belt
Virgin Rock and Roll Sulfur Refined sulfur at least 99.8% pure, cast or in lumps
Wettable Sulfur Powdered and treated for easy water dispersion

ReferencesEdit Conversion tables

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.